Expert Answers about Chevrolet BOLT Locks
- Replacement OEM BOLT Lock for Extang EnCore Hard Tonneau Cover on 2018 Toyota Tundra
- If you have an Extang Encore Hard cover then the Replacement OEM BOLT Lock # EX62CR is the part you're looking for. This is the correct BOLT lock for the EnCore that fits on Toyota Tundra models.
view full answer... - Can the BOLT Trailer Hitch Reciever Lock Be Used With a Standard Key
- No, all of the BOLT locks like the BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches # BLT99FR you're looking at are coded to the vehicles key - there are no options that just use a regular key.
You could just use a standard cable hitch lock like # S64030 which won't use the vehicle key.
view full answer... - Locking Bolt for Swagman Trailhead Bike Rack
- By locking bolt, I believe you mean the Threaded Hitch Pin and Clip # P5902, which came with the Swagman Trailhead # S63360.
Also available is the Locking Anti-Rattle Threaded Hitch Pin # S64029 which locks the rack onto your vehicle instead of just securing it to the hitch. I've added a link to a review video of this product for you to take a look at.
view full answer... - Replacement Cylinder Ford Bolt For A 2020 Ford F-350 Super Duty
- Unfortunately The Replacement Lock Cylinder for BOLT Toolbox Latch # BL692917 is not confirmed to fit your 2020 Ford F-350 Super Duty. You will need The Replacement Lock Cylinder for BOLT Toolbox Latch # BL7025636. This lock will work with your side cut Ford FOB key.
The installation requires the retaining nut # BL4306752 to secure the cylinder in place.
I attached a review video link below.
view full answer... - Demco Recon Locking Plate/Lock Washer for Gooseneck Connection
- We have just what you're looking for with the Locking Plate/Lock Washer for Demco Recon # DM15385-76. This is the washer/plate that locks the bolt in place and keeps it from backing out on your Demco Recon # DM8550045.
view full answer... - BOLT Hitch Receiver Lock for 2019 Toyota Tundra
- In your 2019 Toyota Tundra you can use BOLT hitch lock # BL7023584. This 5/8-inch diameter pin lock will fit both 2-inch and the 2-1/2-inch hitches and it will code to your ignition key the first time you insert and turn it.
view full answer... - What Threaded, Locking Anti-Sway Hitch Lock Fits the Swagman Current # S64678?
- Yes! Swagman does make a locking threaded hitch bolt for the Swagman Current - 1-1/4" and 2" Hitches # S64678. However, it is important to note that the Swagman Current already comes with this locking threaded hitch pin with the rack as well as a locking bike cable. The bolt provides your rack with the anti-sway you are looking for.
However, if you need a replacement, the part you need is the Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks w/ 1-1/4" & Combo Shanks # S64031. This...
view full answer... - Replacement Pin for Bolt Locks
- I was able to reach out to Bolt and unfortunately they do not sell just the pin. In order to get up and running again you will need BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches part # BL7023584.
view full answer... - Recommended Bolt Trailer Hitch Receiver Lock For A 2022 Chevrolet Silverado 2500 With Key Fob
- When it comes to purchasing the correct Bolt trailer lock you need The BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Codes to GM Center Cut Key # BL7023582. Per the manufacturer your key fob will have an emergency key in the fob that will help lock it.
This 5/8 inch diameter receiver lock will code to your vehicle's ignition key (emergency key in key fob). The lock is made out of automotive-grade materials and is nearly impossible to pick or bump. It is corrosion-resistant...
view full answer... - Installing Pop & Lock Custom BOLT Lock Tailgate Handle PAL8540 in 2014 Toyota Tacoma
- If your 2014 Toyota Tacoma has power locks already then the Pop & Lock Custom BOLT Lock Tailgate Handle # PAL8540 will simply wire into that power lock circuit. If the truck does NOT have power locks already then you will need to provide 12V power and use Switch Kit # PAL9520.
view full answer... - Part Needed to Lock Bikes & Swagman XTC-2 2-Bike Platform Rack S64670
- The Swagman XTC-2 2-bike platform rack # S64670 does not include locks but it is easy enough to add a hitch and cable lock kit # S64031 to secure the rack in your hitch and to secure your two bikes to the carrier.
Most bike racks use proprietary hitch bolts that are not interchangeable so your existing hitch lock will not work in the rack. But the threaded bolt in the lock kit allows for both anti-rattle stabilization and anti-theft security. The included cable is routed through the bike...
view full answer... - What Locking Hitch Bolt Will Fit Discontinued Hitch Mounted Yakima Roc 2 Bike Rack
- The hitch bolt that will fit your Yakima Roc 2 is # Y8890200 providing your hitch has a 2 inch receiver. Your research was correct and this is the replacement for the obsolete bolt (8820052) you found.
The Lets Go Aero Hitch Lock # 63232 that you referenced should fit your receiver since you have removed the threaded part of the locking mechanism from inside the bike rack shank. The Yakima # 8890200 is a bit longer than the Aero Lock, however, both will fit a 2 inch receiver. Both bolts...
view full answer... - Locking Nuts for Step Wet Bolt for 1-3/4 Double Eye Springs
- The Step Wet Bolt for 1-3/4" Double Eye Springs # 34007-187-00 are not included with the bolt.
You will want new lock nuts, and the correct part is the Replacement Flange Nut for Dexter Axle Trailer Suspension Kits # 006-092-01.
These are the exact replacement nuts for the E-Z Flex Heavy Duty Rubber Suspension System # K71-652-00 as they have the same 7/16"-20 thread as the wet bolt. I've added a link to a video review for you as well.
view full answer... - Type/Size of Hardware Needed to Install Side Door Bar Lock Assembly #305736
- Although there are no hardware kits available to install the Polar Lock Side-Door Bar Lock Assembly # 305736 we have found that you can use 5/16 inch carriage bolts along with some nuts and washers that are compatible with the bolts. All of which can be acquired at your local hardware store and should be bought with either a galvanized finish or stainless steel.
view full answer... - Recommended Lock for Spare Tire on Malone MicroSport Kayak Trailer
- In order to secure your Spare Tire for Malone MicroSport Trailer - 12" Galvanized - Locking Attachment # MPG465 I recommend using the BOLT Trailer Coupler Lock - 1/2" to 3-3/8" Span - Codes to Ford Key # BL7025285. This will work on a spare tire carrier with as small as a 1/2" wide span, so it will work well with the U-bolt style spare tire mount and the best part is that it keys to your Ford vehicle key so you don't have to worry about fumbling through a bunch of different keys.
If you'd...
view full answer... - Will BOLT Spare Tire Lock Work on Boat Trailer Spare Tire
- Technically yes, the BOLT Spare Tire Lock # BL5922986 will lock onto a boat trailer's spare tire and will hold up to possibly being submerged. The problem you will run into is the lock is designed to fit into the recessed well that you won't normally find on trailer wheels. If you use the lock on a wheel where the entire lock is exposed it would be fairly easy for a would-be thief to get to the lug nut and spin it off by hand.
A better option for your trailer's spare tire might be the...
view full answer... - Are Locks Available or Bolts on 24x60 etrailer Cargo Carrier
- The only locking piece that works with the 24x60 etrailer Cargo Carrier # e98874 is the Threaded Anti-Rattle Hitch Pin Lock # e99047 that you referenced. There aren't any locks for standard hardware save from using threadlocker like the part # LT37420 which makes hardware near-impossible to remove.
I'm not sure I would use the threadlocker though. Thieves tend to be opportunists so if someone is prepared enough to bring tools to steal your carrier I'm sure they would have some backup equipment...
view full answer... - Locking Pins to Keep a 5th Wheel Trailer Hitch From Being Stolen
- We have a lock that secures a fifth wheel trailer hitch to the base rails. The Tow Ready # TR63254 fits 4-bolt and outboard 10-bolt base rails. It's a 1/2 inch diameter pin.
view full answer... - Recommended Solution to Get Both Padlock and Hitch Lock Keyed Alike to Use Single Key
- I may have a solution for you to have all of your locks keyed alike, but you won't be able to do this using a Master Lock Padlock like the # ML312KA and the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers - Keyed Alike # e99047. I'll also add that these types of locks are going to use two different types of locks, so having them keyed alike does present a unique challenge; however, BOLT makes locks that can be keyed specifically to the ignition key of your vehicle and would...
view full answer... - Availability Of A Coupler Lock That Can Be Keyed Alike To A Draw-Tite Locking Hitch Pin
- For your 2022 Ford-350, there isn't an option that will allow you to key the Draw-Tite Trailer Hitch Receiver Lock # 63259 with any of our coupler locks.
However, there are a couple options you can choose from here.
You can use the BOLT Trailer Coupler Lock # BL7032496 which will utilize the center cut key on your 2022 Ford F-350, or you can use the etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2" Ball Couplers # e98893 which can be keyed alike to match other etrailer locks if...
view full answer...
Go To Results